Thermo-FID

Continuous emission monitoring systems (CEMS) and mobile CEMs (T-CEMS) according to
EN 15267-, & QAL 1 as defined in EN 14181: 2014.
LEL monitoring and efficiency calculation on RTO / VRU / DVI / Gas scrubbers / Activated Carbon filters

19" Rack







Can be combined with 19" rack Multi Sampling Unit for 8 or 16 measuring points.
table housing







Thermo-FiD with external or internal sample gas pump and catalyst for zero and burner air
Mobile
Previous slide
Next slide
Wall mounting
Wall mounting
Wall mounting







Atex Zone 1 or 2
Previous slide
Next slide
inline
inline

Atex Zone 2
†
Vortex
inline
Previous slide
Next slide

19″, mobile or as table housing. Version IP 20 for indoor installation

Suitable for suction from Atex Zone 1 & 2.

Versions:

  • With integrated bottle holder for H2 and calibration gas
  • With 4 x A/O output 4-20 mA
  • Remote Control via RS 232 and PC.
  • Diaphragm pump internal or external
  • Dilution for high measuring ranges
  • Methane / Non-methane catalyst, also with double detector for continuous measurement

Wall mounting type FE, IP-54 or IP 65 with internal catalytic converter for zero & burner air.

Set-up and Suction Atex zone 1 or 2.

Versions:

  • Multi Sampling 2, 4, 6 ,8 or 16 measuring points
  • Methane – not Methane
  • CxHy in Hydrogen
  • TOC in Steam or Condensate
  • Stripper for waste water
  • Heated stripper for VOC
  • Heated sample gas zone for aspiration from Zone 0, Device setup Zone 1.

Flange mounting type MK, IP-54 or IP 65 with heated sample gas filter in the probe.

Set-up and Suction Atex zone 1 or 2.

Versions:

  • DIN DN-80 Flange
  • ANSI Flange
  • Optional Integrated Dilution Probe
  • Super fast T90 time to< 2 sec. for LEL monitoring on e.g. Catox / RTO / VRU
  • Automatic back purge of sample gas filter and sample probe
  • Remote control (Windows PC)
Downloads documentation and certificates